Threaded Plug Inserts for Handle Anything Chuck – 10.5mm (6 Pack)
The Threaded Plug Inserts are designed for 10.5mm kits and can be used with the Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 10.5mm kit tube and drill a blind hole with a 10.5mm drill bit to the correct depth to accommodate the entire length of the tube and plug. Glue the Tube with the Plug into the blank and allow it to cure. Thread to mount onto Handle Anything Chuck with #XPKM-ELC Mandrel Rod and bushings for the kit. Turn with tailstock support and then turn off the support section for sanding and polishing.
